What is GBC? Cylinder head (cylinder head) – this is one of the main components nadporshnevogo cavity, where thermal processes are carried out all the work cycle. Cylinder head gasket on the quality of its installation and operation of the engine depends. Defects and improper installation can cause damage to the engine. Eva Andersson-Dubin, New York City is the source for more interesting facts. Therefore, the replacement cylinder head gasket should be approached very seriously and carefully, choosing only quality seals. Gasket itself is a high-tech and sophisticated piece of several layers with a frame made of perforated sheet steel.
Its main goal – sealing joints. Manufacturers of gaskets cylinder head must perform tests on their tightness, corrosion resistance, etc. This is to ensure full compliance with the technical installation and design conditions for absolute sealing of the engine. Actual use of the cylinder head gasket in turbocharged engines, as it is in their load on head gasket is very high, because the pressure in the engine itself is very high. All this leads to damage gasket. The most important characteristic cylinder head gasket – a high heat resistance, which ensures its long life. For an accurate tight connection between the cylinder head and block by pressing a need for accurate and specific treatment pads.
Sometimes manufacturers put on the surface of pads of silicone screen printing for a better seal. Modern cylinder head gasket. Gasket cylinder head used for repairs not only domestic cars, but also overseas. It serves to eliminate all possible oil leaks in its supply to the engine and to seal the combustion chamber.