Argentina Regulation Safety

All work done in height requires special protection. In Argentina Regulation defines as working height to those carried out at more than two meters, on scaffolding, vehicles or stairs, among others. From everyday tasks like painting a wall, until activities on tall buildings or large excavations are regulated within the risky work done in height. For this reason are recommended as safety elements: safety harness, protection against falls, sliding anti gloves, belt, helmet, scaffolding, etc. Today there are many ways to prevent accidents, in addition, following the advice of experts can be guaranteed risk-free work. Main risks, which try to avoid in the workplace are: crashes shock loss of stability falls of persons or objects contact with electrical wires. Experts distinguish two causes in accidents.

Human causes or dangerous behaviors and material causes. Within human causes are distinguished: factors physical: imbalances, lack of reflexes, agility, etc. Psychological factors: nervousness, fear, deconcentration, etc. Formative factors: lack of knowledge of the safety rules, incorrect use of utensils, etc. Among the material causes fault we can find elements of protection, rupture or climatic factors that interfere in the security. The falls is a type of accident common, but easily preventable in work environments, why anti systems have developed falls safe. Entire system to prevent falls, need of the following items; Connecting element: is the belt that joins the harness to the anchor point. Anchor point: is the point of grip in case of fall.

Procedure in case of rescue. Harness protection. The safety harness is a system of straps which distributes the pressure of the clash, in the case of a fall. It is designed to evenly distribute the forces acting on the body. The safety harness is a preventive element that allows more than one anchor point. The choice of anchor point is very important because it is the point where the harness is suspended safely. The choice of an anchor point is made according to the type of work. Everytime the worker must make use of anti fall protection elements, these must be in proper condition. Why the regular realization of control should include: reviewing binding, stitching, and fixing each one of them. Observe the manufacturer’s instructions for storing and using them. Not maintain any element of security exceeding their useful life. The sale of haaumentado safety harnesses in recent years that there is greater awareness of occupational hazards and the need to prevent them.