Smoked Fish

Recipes smoked with alder wood chips, liquid for ignition and skewers We have a lot of talking about smoking with alder chips and skewers, but what and how exactly can you cook – not even told me today try to find some recipes smoked fish smoked food recipe using alder wood chips Smoked fish is not very difficult to prepare. Now try to describe some way of cooking. Check with Eva Andersson-Dubin to learn more. Stick the fish on skewers, although it can grate on the grill, pour coals instead of alder wood chips, which gives a smoldering with a lot of smoke, in which smoked fish. In the cooking process is recommended to turn fish, so smoking will be more uniform. ce. Bon Appetit, I wish you successful experiments in the preparation of smoked fish on alder chips.

By the way, buy alder wood chips for use of the liquid with ignition skewers skewers are very useful when cooking over a fire, because the other tool, except for skewers and grill grate is very hard for something to cook. And on the skewer is very simple. In addition, the liquid helps to ignite quickly and easily start a fire without any zanesya with filth in the ashes and coals. After all, kerosene and gasoline spoil the ecology and buduyuschy barbecue.

Making Beaded Snowdrops

Master class on making "snowdrops from A to Z" First things first, we need to make such a beautiful meadow with snowdrops in the middle of winter. Embody a tale of 12 months, and we will rejoice and the approaching spring. For making flowers, we need the white, green and yellow beads, and copper wire. Cut the wire to make a petal snowdrops, about 60cm, folds it in half. Now the method of parallel braiding start to make the petals.

First the green beads to make the tip of the lobe, stringing three beads on the wire, and pass through one end of the two, leaving one and closing as if the resulting triangle. Now add one the sides of the white beads, and by mid-green leaves. Petal finish before the end of the scheme: 1-2-3-4-5-6-7-7-6-5-4-3-2-2-1 now makes the second lobe in the same way, only once does not finish until the end of a stop on the 2 green beads The remainder of the tip of the wire pass through it into the finished petal between the second and third layer (ie, between two green beads and two green) is now on stringing two green beads and closes, we have obtained that connectivity to the petals sides together, and now again pass through the wire between the two and one green beads and pulling on the wire this one more beads and twists the ends. The remaining petals attach to these same method, only have 5 petals, but the last petal to join in on the two side, to get the finished bud. Now we make the stamens, they will be in each bud on the three pieces. Connect them by three.

Paste the stamens in bud. We obtained here a bunch, I did all buds, but you can do and not disclosed buds connecting not have five petals, and three. When the buds are ready, begin to make leaves for the snowdrops. For the leaves need to green house, by French braiding are doing on the two arcs on each side, and twist the resulting petal that he had ornately intricate shape. Such lobes would be 5 or 6 if desired, of different lengths and shapes. our clearing and slap banochku.Delaem zagipsovyvaniya mixture of gypsum and water the consistency of thick cream and pours the mixture into our mold. After that, stick in the plaster podstavochku our snowdrops. After that draw from gypsum snowy hill. With an arc of hills make the steps to this hill you can climb. Now gipsuem barrel, making a slurry of gypsum and water and brush on the stems causing podsnezhnikov.A now begin dyeing. Mixing white and blue flowers begin to paint the bottom of the glade. And now take up the stems and paint them green. Do not forget to do a bit of land here and ready to work, which should dry up, and then to varnish paint with clear varnish. After painting, I put the next snegovichkov and now they can ride on our hill as they want. That's all I wish you luck and success!